SQ-800, High Speed Automatic Strapping Machine

How do you replace the world’s most reliable strapping machine?
… With a better one!!!

The SQ-800 is the newest addition to the StraPack strapping machine line. It has all of the features and reliability of the RQ-8x, with many upgrades. It operates at up to 54 cycles per minute, regardless of the tension setting. The new DC power design results in improved operation while requiring fewer moving parts. The improved system for strap feeding, reversing and tensioning results in quiet operation while generating much less strap dust. Check out the other features and options that make the SQ-800 the new workhorse of the StrapPack line.

Teknika MUL-325 Tensioner for Composite, Cord and Textile Strapping

The MUL-325 is an advanced tensioner for all types of Cordstrap, GatorStrap, composite and woven strapping. The patented gripping mechanism holds and releases strap with a vertical motion, providing increased holding power and reduced wear.

• For ½”, ⅝” and ¾” strap widths
• Lightweight and ergonomic at 4 lbs
• Patented cutter design
• Patented gripper mechanism

Teknika MUL-375 HD Tensioner for Composite, Cord and Textile Strapping

With the same features as the MUL-325 installed on a larger, more rugged, frame, the MUL-375 is the finest mechanical tensioner available for working with heavy duty Cordstrap, GatorStrap, composite and woven strapping.

  • For strap widths from ¾” to 1-⅝”
  • Engineered for high tension applications
  • Patented cutter design
  • Patented gripper mechanism

Zulu Bar Tensioner for Composite, Cord and Textile Strapping

A simple lever-style tensioner with no moving parts. Designed for securing large loads such as lumber, pipe and trusses.

  • For strap widths up to 2”

Gator Kit Portable Kit for Securing Loads with GatorStrap

A convenient strapping kit contained in a heavy duty gym bag for maximum portability. Complete with the following accessories:

  • Two 250’ rolls of GatorStrap
  • 60 buckles
  • One Zulu Bar tensioner
  • One strapping cutter
  • Instructions

Orgapack OR-T 450 Combination Tool for ⅝” and ¾” polyester and nylon strapping

Orgapack’s workhorse for heavy duty strapping applications, the new ORT-450 battery powered tool provides an efficient and cost effective alternative to using metal strapping and seals. This tool is designed for use in heavy duty applications such as securing pallets, large loads, and lumber.

Features are as follows:

  • Intuitive touchscreen operation panel
  • Three selectable operation modes: manual, semi-automatic, fully-automatic
  • Adjustable strap tension from 90 lbf to 1,000 lbf
  • Adjustable sealing time for perfect welds
  • Highly protected 18 volt 4.0 Ah Bosch Li-ion battery
  • Easy strap threading – both straps are inserted together
  • Weight, with battery: 9.5 lbs
  • Designed and manufactured in Switzerland

Orgapack OR-T 260 Combination Tool for ½” and ⅝” polyester and polypropylene strapping

The ORT-260 battery powered strapping tool is Orgapack’s latest design for medium to heavy duty applications. This ergonomic tool is easy to use for a broad range of strapping tasks, and provides an efficient and cost effective alternative to using metal strapping and seals.

Features are as follows:

  • Intuitive touchscreen operation panel
  • Three selectable operation modes: manual, semi-automatic, fully-automatic
  • Adjustable strap tension from 90 lbf to 560 lbf
  • Adjustable sealing time for perfect welds
  • Highly protected 18 volt 2.0 Ah Bosch Li-ion battery
  • Easy strap threading – both straps are inserted together.
  • Weight, with battery: 8.6 lbs
  • Designed and manufactured in Switzerland

Orgapack OR-T 130 Combination Tool for ⅜” and ½” polypropylene strapping

The ORT-130 battery powered strapping tool is Orgapack’s latest design for light to medium duty applications. This ergonomic tool is easy to use for a broad range of strapping tasks, and provides an efficient and cost effective alternative to using metal strapping and seals. The OR-T 130 has all of the features of the more robust Orgapack tools, while operating efficiently with less expensive polypropylene strapping.

Features are as follows:

  • Intuitive touchscreen operation panel
  • Three selectable operation modes: manual, semi-automatic, fully-automatic
  • Adjustable strap tension from 22 lbf to 270 lbf
  • Adjustable sealing time for perfect welds
  • Highly protected 18 volt 2.0 Ah Bosch Li-ion battery
  • Easy strap threading – both straps are inserted together.
  • Weight, with battery: 7.9 lbs
  • Designed and manufactured in Switzerland

Dynamic 2100 Combination Tool for ⅝” and ¾” polyester and nylon strapping

The Dynamic 2100 is an economical battery-powered strapping tool for medium duty applications. Its simple analog controls make it very easy for any operator to adjust the tension and weld-time, as necessary. Its versatile design allows it to be used for a broad range of strapping tasks, and provides an efficient and cost effective alternative to using metal strapping and seals.

Features are as follows:

  • Simple analog tension and weld time adjustments
  • Adjustable strap tension from 146 lbf to 675 lbf
  • Adjustable sealing time for perfect welds
  • Latest technology 14.4 volt 3.0 Ah Li-ion battery
  • Easy strap threading – both straps are inserted together.
  • Weight, with battery: 5 lbs
  • Designed and manufactured in Italy by Fromm

ZAPAK ZP97A Combination Tool for ⅝” and ¾” polyester and nylon strapping

The ZP97A is Zapak’s new heavy duty battery tool. With features found in the most costly battery powered strapping tools, the ZP97A is among the least expensive tools in its class. This tool has been engineered and manufactured in Taiwan to the highest standards of quality. The reliability and durability of this tool is backed up by a three year warranty.

Features are as follows:

  • Intuitive touch screen panel for easy adjustments
  • Adjustable strap tension from 88 lbf to 880 lbf
  • Adjustable sealing time for perfect welds
  • Powered by Bosch 18.0 volt 4.0 Ah Li-ion battery for more cycles per charge
  • Patented strap grippers enable higher tension
  • Patented brushless motor produced by Zapak for long service life
  • High precision micro bearings for reduced friction and greater longevity
  • Easy strap threading – both straps are inserted together.
  • Three year factory warranty on motor and electronic control unit.

ZAPAK ZP93A Combination Tool for ½” and ⅝” polyester and polypropylene strapping

The ZP93A is Zapak’s new medium range battery tool. With features found in the most costly battery powered strapping tools, the ZP93A is among the least expensive tools on the market. This tool has been engineered and manufactured in Taiwan to the highest standards of quality. The reliability and durability of this tool is backed up by a three year warranty.

Features are as follows:

  • Intuitive touch screen panel for easy adjustments
  • Adjustable strap tension from 22 lbf to 550 lbf
  • Adjustable sealing time for perfect welds
  • Soft tension mode for light and fragile items
  • Powered by Bosch 18.0 volt 4.0 Ah Li-ion battery
  • Patented strap grippers enable higher tension
  • Patented brushless motor produced by Zapak for long service life
  • High precision micro bearings for reduced friction and greater longevity
  • Easy strap threading – both straps are inserted together.
  • Weight, with battery: 5 lbs. Lightest in the industry.
  • Three year factory warranty on motor and electronic control unit.

ZAPAK SW25A Strapping Welder for ½” to 1” polyester and polypropylene strapping

The SW25A is Zapak’s new solution for rapidly sealing a wide range of Polyester and Polypropylene strapping.This lightweight tool eliminates costly and time consuming metal seals

Features are as follows:

  • Weight, with battery: less than 5 lbs. Lightest in the industry.
  • Powered by 18 volt, 4 ah Bosch Battery, for more that 500 seals per charge.
  • Complete with Bosch charger.
  • Works perfectly with any manual tensioner.
  • Excellent backup for costly battery-powered combination tools.
  • Can apply multiple welds for difficult sealing applications.

Itatool B2000 Combination Tool for 1” and 1-¼” polyester strapping

A rugged, high tension, combination tool for wide, heavy duty, polyester strapping. The 36 volt battery provides all of the power needed to apply maximum force to large loads. Can be used with polyester strapping to replace 1-¼” steel strapping in many applications.

Features are as follows:

  • Powered by a 36 volt Bosch Li-ion battery
  • Strap tension up to 2,000 lbs
  • Simple one-button operation
  • Intuitive controls for setting mode, tension and welding time
  • Three mode settings: Automatic, semi-automatic and manual
  • Strap thickness: from .031” up to .055”
  • Weight, with battery: 13.8 lbs

FROMM P331 Combination Tool for ¾” to 1-¼” heavy duty polyester strapping

The P331 is Fromm’s latest model of heavy duty battery tool. A very powerful tool for handling strapping widths up to 1-¼”. With tension adjustable up to 1,575 lbs, this tool can be used to replace heavy duty steel strapping applications, in order to generate major cost savings.

Features are as follows:

  • Adjustable strap tension from 270 lbf to 1,575 lbf
  • Adjustable sealing time for perfect welds
  • Strap widths: ¾” – 1-¼”
  • Strap thicknesses: .024” – .060”
  • Power supply: Latest 36.0 volt 4.0 Ah Li-ion battery technology
  • Tensioning speed: 1.5 – 2.5 inches per second
  • Easy strap threading – both straps are inserted together.
  • Brushless motor for less maintenance

Signode GripPack Battery Powered Tensioner for ¾” and 1-¼” HT strapping

A lightweight, ergonomic, battery-powered pusher tool for a totally portable banding operation.

  • 18 volt Li-ion battery
  • 120 cycles per charge
  • Charge level indicator
  • One touch operation
  • Adjustable tension
  • For strap thickness from .025” to .031

Signode GripPack Battery Powered Sealer for ¾” and 1-¼” HT strapping

A lightweight, ergonomic, battery-powered sealer for a totally portable banding operation.

  • 18 volt Li-ion battery
  • 240 single notches per charge
  • Charge level indicator
  • One button operation
  • Illuminated sealing area
  • Strap detection system
  • For strap thickness from .025” to .031

Teknika MUL-16, Combination Tool, for ½”, ⅝”or ¾” strapping

An economical sealless tool for regular duty steel strapping, with thicknesses from .015” to .023”.

  • Manufactured in Europe
  • Reversible dies
  • Ergonomic design
  • Exceptional value
  • Inexpensive and easy to operate

Teknika MUL-20, Combination Tool, for ½”, ⅝”or ¾” strapping

A sealless combination tool for high tensile and regular duty steel strapping, with thicknesses from .020″ to .025″.

  • Our most popular sealless tool
  • Manufactured in Europe
  • Reversible dies
  • Easy replacement of wear parts
  • Ergonomic design
  • Designed to minimize damage from drops

ZL90 Sealless Combination Tool for 1-¼” HT strapping

This is the only sealless combination tool designed for use with 1-¼” high tensile strapping. The Z-Lock feature prevents the seal joint from decoupling if the strapping becomes loose.

  • Manufactured in Canada
  • Patented seal joint design
  • Z-Lock reverse locking system
  • Simple replacement of wear parts
  • For strap thicknesses from .025” to .031”

ZL31 Sealless Combination Tool for Demanding Applications

The ZL31 is specifically designed for use with heavy duty high tensile strapping. Z-Lock prevents the seal joint from decoupling if the strapping becomes loose.

  • Manufactured in Canada
  • Patented seal joint design
  • Z-Lock reverse locking system
  • Simple replacement of wear parts
  • Strap type: ¾” high tensile
  • Strap thicknesses from .025″ to .031″

ZL25 Sealless Combination Tool for Demanding Applications

The ZL25 is specifically designed for use with high tensile strapping. The Z-Lock prevents the seal joint from de-coupling if the strapping becomes loose.

  • Manufactured in Canada
  • Patented seal joint design
  • Z-Lock reverse locking system
  • Simple replacement of wear parts
  • Strap widths: ½”, ⅝”, ¾”
  • Strap thicknesses from .015″ to .025″

MS31 Sealless Combination Tool for Heavy Duty Applications

The MS31 is designed for use with heavy duty high tensile strapping up to ¾” x .031”.

  • Manufactured in Canada
  • Patented seal joint design
  • Simple replacement of wear parts
  • Strap type: ¾” high tensile
  • Strap thicknesses from .025″ to .031″

MS-25, Combination Tool 3/8″, 1/2″, 5/8″, & 3/4″

ZR MS25 Manual sealless combination tool for high tensile steel strapping. For sizes 3/8″, 1/2″, 5/8″ & 3/4″ – .015″ – .025 HT

TF25 Sealless Combination Tool for General Applications

For use with all types of steel-based strapping.

• Manufactured in Canada
• Patented seal joint design
• Strap widths: ½”, ⅝”, ¾”
• Strap thicknesses from .015” to .025”

Fromm A335 Combination Tool for General Applications

Handy lightweight sealless combination tool for strapping flat packages (i.e. pallets, bales, crates, cases and various packages).

  • Manufactured in Europe
  • Rugged and highly reliable
  • Strap type: standard duty
  • Strap width: ½” – ¾”
  • Strap thickness: .020” to .023”

Fromm A337 Combination Tool for Challenging Applications

An ideal tool for a wide range of vertical and horizontal strapping applications for flat goods in almost all industries.

  • Manufactured in Europe
  • Microlock seal joint prevents joint decoupling
  • Free wheeling system for high tension
  • Strap type: standard duty and high tensile
  • Strap width: ⅜” – ¾”
  • Strap thicknesses from .015” to .025”

Fromm A338 Combination Tool for High Tension Applications

A sealless  tool designed for applying high tension to a wide array of flat packages.

  • Manufactured in Europe
  • Geared for high strap tension
  • Strap type: standard duty and high tensile
  • Strap width: ½” – ¾”
  • Strap thickness: .020” to .028”

RQ-8X, Standard Automatic Strapping Machine

The RQ-8x is the most dependable strapping machine yet developed. Its innovative design has made it the most reliable general-purpose strapping machine on the market. It features easy strap loading, auto re-feed, loop ejection, lubrication free operation, and safe two-stage tensioning. The RQ-8x has been shown to have the lowest maintenance costs of any strapping machine available. A wide range of options allows the RQ-8x to be customized to meet the specific needs of your application. Reliability, 50 cycle per minute speed, ease of operation, innovative design, and low maintenance costs make the RQ-8x the most cost effective general purpose strapping machine on the market.

RQ-8Y, Side Seal Automatic Strapping Machine

The side-seal model RQ-8Y adapts easily to conveyorized packaging systems. The narrow arch will fit through a 3” gap in the conveyor, making it easy to slide the RQ-8Y out of the conveyor system when service is required. Several options are available to make it easy to integrate the RQ-8Y into an automated system. An end of cycle interlock signals the conveyor system to restart. Out of strap or cycle error signals warn that the strapping machine requires operator attention. The RQ-8Y is ideal for heavy products, since the weight of the product is supported by the conveyor. In applications where dirt and dust is a factor, the side-mounted strapping head provides protection.

RQ-8IR2, Compact Strapping Machine

The RQ-8IR2 and RQ-8IR3 machines are designed for use in direct mail, graphic arts, magazine and newspaper distribution, and laundry bundling applications. The chief difference between the two models is speed. 40 cycles per minute for the IR2 compared with 60 cycles for the IR3.

With the coil located inside the machine, the RQ-8IR series machines take up a minimum of space. They run inexpensive 1/4” and 3/8” strapping, and mail trays easily fit into the 27″ wide by 16″ high arch. With the addition of a programmable photocell, the operator is free to keep both hands on the package while applying one or two straps without using a hand switch or foot pedal.

RQ-8IR3, High Speed Compact Strapping Machine

The RQ-8IR2 and RQ-8IR3 machines are designed for use in direct mail, graphic arts, magazine and newspaper distribution, and laundry bundling applications. The chief difference between the two models is speed. 40 cycles per minute for the IR2 compared with 60 cycles for the IR3.

With the coil located inside the machine, the RQ-8IR series machines take up a minimum of space. They run inexpensive 1/4” and 3/8” strapping, and mail trays easily fit into the 27″ wide by 16″ high arch. With the addition of a programmable photocell, the operator is free to keep both hands on the package while applying one or two straps without using a hand switch or foot pedal.

RQ-8000, High Speed Automatic Strapping Machine

The RQ-8000 represents the next evolution of the RQ-8 series, StraPack’s most popular and longest selling machine design. The RQ-8000 offers higher strapping speed (over 60 cycles per minute), along with an integrated foot bar, five position height adjustment and a built-in cycle counter. This model retains all of the popular features of the original RQ-8: automatic strap loading, auto re-feed, lubrication free operation, fast heater warm-up, loop ejection and a wide range of operator-selectable strapping tension settings with safe two-stage tension.

RQ-7000, Space Efficient Automatic Strapping Machine

The high-speed sealing head can strap up to 70 bundles per minute without sacrificing strap tension.The space-efficient dispenser design simply slides out from inside the body cabinet, making strap coil loading easy and minimizing the space needed for the machine. The reel rotation is stopped by an electromagnetic brake instead of the standard mechanical brake. When the strap coil runs out, the machine will automatically eject any remaining strap from inside the machine saving the operator the time and hassle of clearing out the strap by hand.

RQ-8A, Fully Automated w/Conveyor Table Top

The RQ-8A is available in several tabletop belt configurations to match various package sizes. A roller conveyor version is also available. The conveyor speed is variable, up to 98 feet per minute on standard machine, and as an option, up to 132 feet per minute. An inverter system makes the conveyor speed easily adjustable. The standard RQ-8A allows the selection of 0, 1 or 2 straps. Optional automation packages are available to provide a variety of automatic strap placements. The standard RQ-8A also features self-correcting technologies vital in fully automatic applications, such as automatic re-feed, loop ejection, and an integrated, self-diagnostic monitoring system. When the application depends on reliable operation and low maintenance, the RQ-8A is a perfect choice.

RQ-7000M, Stainless Steel Automatic Strapping Machine for Harsh Environments

The moisture-resistant RQ-7000M boasts an advanced high-speed sealing head along with the durability of the AQ-7M, and most of the features of StraPack’s  best-selling automatic machine, the RQ-8X, such as strap self-loading, re-feed and loop ejection. The RQ-7000M is capable of 50 cycles per minute, which is makes it one of the fastest machines of its kind. Permanently lubricated mechanisms, side-seal design, and body parts made of stainless steel make the RQ-7000M the ideal machine for harsh environments such as fish, meat, and poultry packing. Fully automatic configurations are available.

RQ-8CR/FR, Fully Automatic With Roller Conveyor And Pneumatic Compression For Corrugated Bundling

The reliability, speed, ease of operation and low maintenance costs of the RQ-8 Series strapping machines are now available on a bundling machine designed specifically for the corrugated industry. The RQ-8CR/FR features high cycle speed, easy strap loading, auto re-feed, loop ejection, lubrication-free operation and safe two-stage tensioning. It incorporates a 65” wide x 20” high arch, top compression, a driven roller conveyor table and runs 1/4” strap to meet the requirements of corrugated container production. For production settings with high output requirements, the RQ-CR/FR is also available with a dual strap dispenser and automatic strap transfer system, as pictured above. This system is designed to prevent costly production stoppages due to strap coil changes.

RQ-8YAO, Side Seal Automatic Palletizing Machine With Pallet Void Feeder

The StraPack RQ-8YAO is an automatic, side seal strapping machine that straps palletized products using polypropylene or polyester strapping. The RQ-8YAO operates as a stand-alone unit or can be integrated into a packaging line. The arch sword penetrates the pallet void and straps the product to the pallet. It features the RQ-8 strapping head with a DC drive torque tension mechanism that maintains consistent, high tension up to 225 lbs. Fast, consistent, precise, and repeatable strap feeding avoids jams and increases up-time. Also, the strap festooning system maintains even strap tension during the reversing cycle, a useful feature on large arch machines.

AQ-7, Economical 220 Volt, 3 Phase Strapping Machine

The AQ-7 is an economical version of the RQ-8x strapping machine. It can be ordered for strap widths from 1/4” to 5/8”. The AQ-7 features the same lubrication free operation as the standard RQ-8x. The arch flap design assures perfect strap placement and alignment. Consistent tension is applied with a reliable  tension arm system. Using cost efficient 3-phase power, the motors operate only when necessary. Capable of 27 straps per minute, the AQ-7 offers proven reliability and durability at an affordable price.

JK-5000, Economy Model Automatic Strapping Machine

Designed for moderate-duty applications, the JK-5000 is StraPack’s most inexpensive arch-type strapping machine. Although low in cost, it can achieve up to 37 cycles per minute. It operates on 110 volt power and can be easily adjusted for strap widths from 1/4” to 5/8”. It also features automatic strap re-feed and loop ejection, along with a self diagnostic microprocessor which continuously monitors electrical functions.

IQ-400, SEMI-AUTOMATIC STRAPPING MACHINE

The innovative IQ-400 is amazingly quiet, and runs only when activated. This makes it ideal for office use. In addition, its heavy duty design makes it ideal for  demanding industrial and commercial operations. Fewer moving parts and a simple sealing head design assure ease of maintenance and low cost of operation. Two tension modes make the IQ-400 ideal for a wide variety of strapping applications.

JK-2P, HEAVY DUTY, PNEUMATIC STRAPPING MACHINE

The innovative JK-2P is based on Strapack’s most rugged and durable semi-automatic strapping machine. Interpack has converted the standard, all-electric, JK-2 to operate on air pressure and electrical current from a 12 volt DC battery. The JK-2P is designed to be used in locations where 110 volt AC electric power is not available.

The JK-2P comes with the same features and reliability as the standard JK-2. It also carries the same six month parts and workmanship warranty.

D-53X2, Standard Semi-automatic Strapping Machine

Utilizing two DC direct drives, which operate only on demand, the D-53X2 is faster and more reliable than its predecessors. The microprocessor has been upgraded to improve tension control. Tension is applied with a knurled steel wheel, which allows the application of high tension without scuffing the strapping. Tension is easily adjusted from 4.4 lbs to 88 lbs, allowing the D-53X2 to cover a wide range of applications.

D-53PLT2, Portable Pallet Strapper

The D-53PLT2 is designed to economically and quickly strap a variety of pallets, using polypropylene strapping up to 450 pounds in breaking strength. The D-53PLT2 can cut the time it takes to strap pallets by up to 2/3, when compared to using hand tools. Its simple operation entails pushing the track through the pallet void, pressing a button to feed the strap, then inserting the tip of the strap into the machine. Within 2 seconds the strap operation is completed. The D-53PLT2’s unique design enables it to strap pallets less than 15” high. The strap track is retractable by using a hand-crank. The track height can be set to a high or low position, to accommodate the type of the pallet or size of its void. To insert edge protection, there is a manual strap reversing mode.

The D-53PLT2 is available in two models – one using a 110 volt power cord and another powered by a rechargeable 12 volt battery.

D-53M2, STAINLESS STEEL SEMI-AUTOMATIC STRAPPING MACHINE

D-53M2 employs the same strapping head design as the top-of-the-line D-53X2. However, the internal components are made of stainless steel, brass, and steel with a rust resistant coating, and are positioned vertically. The body is primarily constructed from stainless steel. The strapping dispenser is located on top of the machine for protection from wet environments. The D-53M2 is the perfect machine for moderate volume, or off line, applications in the meat, poultry, and seafood industries.

LP 2100-SRT, ECONOMICAL LOW PROFILE STRETCH WRAPPER WITH POWER PRE-STRETCH

The Cousins LP 2100-SRT is a superior value in stretch wrappers equipped with powered pre-stretch. With an optional ramp, this machine can be loaded easily with a pallet jack or walkie. Although this is Cousins’ least expensive pre-stretch machine, the 2100-SRT has features found in much more expensive wrappers. The LCD operator interface enables the operator to select from three different wrap programs to handle  a variety of palletized loads. Turntable speed and film carriage up and down speeds are also easily adjustable. Ask us about the many other operational and safety features of this remarkable stretch wrapper.

HIGH PROFILE MODEL ALSO AVAILABLE

HP-2100-SRT, ECONOMICAL HIGH PROFILE STRETCH WRAPPER WITH POWER PRE-STRETCH

The Cousins HP 2100-SRT is a superior value in stretch wrappers equipped with powered pre-stretch. The raised octagonal turntable allows for easy forklift loading. Although this is Cousins’ least expensive pre-stretch machine, the 2100-SRT has features found in much more expensive wrappers. The LCD operator interface enables the operator to select from three different wrap programs to handle  a variety of palletized loads. Turntable speed and film carriage up and down speeds are also easily adjustable. Ask us about the many other operational and safety features of this remarkable stretch wrapper.

LOW PROFILE MODEL ALSO AVAILABLE

LP-SWA, FULLY AUTOMATIC LOW PROFILE STRETCH WRAPPER

The innovative HP-SWA uses Cousins’ patented “A-Arm” design to apply and cut the film at the top of the pallet. This means that there is no mechanical clamp on the turntable which can be damaged when loading the pallet. Because the film is cut at the top of the load, there is no film “tail” dragging on the floor when the pallet is moved. Unlike most fully-automatic stretch wrappers, the SWA series are all-electric, compressed air is not required. Best of all, it is the least expensive fully automatic machine on the market.

HIGH PROFILE MODEL ALSO AVAILABLE

HP-SW, “The Switch” HEAVY DUTY HIGH PROFILE STRETCH WRAPPER

The Cousins HP-SW is the only semi-automatic stretch wrapper with the capability of being easily and economically converted to a fully automatic configuration. The patented “A-Arm” assembly can be installed without moving the wrapper from its location. The HP-SW can handle pallet weights up to 4,500 lbs. Three different wrapping patterns can be pre-programmed and selected by the operator.

LOW PROFILE MODEL ALSO AVAILABLE

3300-A, CONVEYORIZED AUTOMATIC STRETCH WRAPPER WITH PATENTED A-ARM

Wrapping Sequence:  The pallet is placed on the turntable and the forklift operator initiates cycle-start with a remote device. The load is wrapped and discharged onto the exit conveyor so that the turntable is clear to accept the next load. The wrapper can also be configured to operate in-line with a palletizer  or with existing conveyor. Like other A-Arm models, the 3300-A is very affordable.

4100 HERC, OVERHEAD SEMI-AUTOMATIC STRETCH WRAP SYSTEM

The Cousins Model 4100 Series allows heavy loads to be placed on the floor while the overhead arm wraps the pallet. Affordable and simple the Model 4100 series machines have more standard features than any other overhead (rotary arm) pallet wrapper.

 

LP550, “PUP” MEDIUM DUTY LOW PROFILE STRETCH WRAPPER

The Cousins economy model LP 550 is the perfect step up from hand wrapping pallets. The friction brake film carriage can use hand wrap or machine wrap.

Three models are available:

550-M – The operator controls the carriage up and down with a selector switch.

550-SA – The operator sets an upper limit stop, and timers control the top and bottom wraps and stop the turntable automatically. This allows the operator to leave after starting the wrap cycle.

550-SAP – It is like the 550-SAP except that the carriage stop is replaced by a photoeye load height sensor.

AQ-7PLT

The AQ-7PLT is a heavy-duty semi-automatic pallet strapping machine for use with polyester strapping. Polyester is a stronger material than polypropylene, and ideal for heavy loads. Polypropylene strap can also be used without changing any parts. The sealing point is only 12 ¾” from the floor, so even low pallets can be strapped. Tension can be adjusted up to 155 lbs. The dispenser takes standard 16 x 6 coils. Heavy-duty metal casters allow the AQ-7PLT to be quickly moved and installed in a new location. It plugs into any standard 120 VAC outlet. The strap feeding bayonet folds up for easy and safe storage.

D-53HE2

The D-53HE2 is designed to apply horizontal straps to palletized goods and Gaylord boxes where automated equipment is too expensive, and hand tools or buckles are too time-consuming and cumbersome. The strapping height is quickly adjusted through the counterbalanced sealing mechanism that moves smoothly and effortlessly to the desired strap location. The innovative pendant switch allows operation of the machine from either side of the load while enabling the operator to control the feeding, tensioning, and sealing of the strap with one hand. Operator control makes positioning of the strap and/or the placement of corner protection an easy task. The D-53HE2 is an ergonomic and inexpensive solution to the labor intensive placement of horizontal straps. A battery operated version is available.

Ripack 3000 Heat Gun Kit

  • Ripack 3000 Heat Shrink Gun
  • High Impact Carrying Case
  • Securepack Variable Pressure Regulator with Safety Valve
  • Adjustable Wrench for tightening fittings
  • 26 foot propane gas hose with swivel connector
  • Rotatable Stainless Steel Cold Nozzle System
  • Spare Igniter stored in handle
  • Lightweight at 2.7 lbs for ease of use
  • Heat Output: 260,000 BTU/hour
  • One Year Warranty

Shrink Pro 10 Heat Gun Kit

  • Shrink Pro 10 Heat Shrink Gun
  • Hard Durable Carrying Case
  • Pressure Regulator with Safety Valve
  • Two Wrenches for tightening fittings
  • 26′ Propane gas hose
  • Flame Nozzle with Stay-Cool Heat Shield
  • Safety Gloves
  • Safety Glasses
  • Spare Spark Plug
  • 12 month Parts Warranty

AS Series

The BestPack AS Series is an operator-free carton sealer designed to meet the needs of uniform in-line carton closure applications. Designed with a solid four column support structure and using dual motor side belt technology, the AS-S closes all four top flaps and seals the top & bottom of the carton, using 45-60 PSI and 4-5 SCFM of air.

Our AS line incorporates our exclusive 2″ or 3″ pop-out pressure-sensitive “High Speed” tape heads with BestPack’s patented tab adjustment. All BestPack units are available in our standard baked enamel finish and food grade 304 stainless steel.

Machine weight and dimensions may vary depending on carton.

RS Series

The BestPack RS Series is a Semi-Automatic Random Tape Carton Sealer built for speed and rugged dependability. Using side belt drives, the RS easily seals a wide range of random carton weights and sizes, with masts that allow for an extra 4″ of carton height on the upper assembly. Able to effectively seal very light to very heavy cartons, BestPack’s RS sealer is a workhorse and the most flexible unit in our random carton sealer product line.

MBS Series

The BestPack MBD Series is an operator-fed, adjustable carton sealer designed to efficiently fulfill light to heavy duty uniform top and bottom-sealing carton closure application needs. The two bottom belts are powered by a 110V UL-approved electric motor. The MBD Series is also designed with four adjustable legs for quick and easy height modification to suit the needs of your production lines. Dual telescopic masts allow for an extra 4″ carton height extension on the upper assembly. Machine weight and dimensions may vary depending on carton sizes.

MUL-320, Tensioner, 3/4″

The MUL-320 is an advanced PET/PP tensioner for heavy duty applications. The patented gripping mechanism grips and releases strap with a vertical motion, providing increased holding power and reduced wear. The patented tension drum aligns automatically for easy strap threading

MUL-330 Offset Sealer, 5/8″

The MUL-330 is an advanced patented PET sealer for heavy duty applications. The staggered, symmetrical jaws eliminate the need to orient the tool on the non-symmetrical, Orgapack-type, seal. Unique jaw design allows minimal clearance between seal and package surface.

MUL-331, Heavy Duty Sealer, 1/2″

The MUL-331 has the same patented jaw design as the MUL-330, but accommodates the ½” Orgapack-type seal.

MUL-360, Tensioner, Up to 5/8″

MUL-360 is the latest design of universal plastic strapping tensioners. All parts are made from steel — no aluminum “drop & break” parts. All parts subject to wear are heat-treated. MUL-360 exceeds highest industry standards. It has the smallest footprint, lightest weight and guarantees the best gripping performance.

MUL-370, Heavy Duty Wide Strapping Tensioner, 1-1/4″

Advanced, patented design with superior performance in the heaviest PET applications for strapping up to 1-1/4″ (32mm). All steel construction minimizes damage from accidental drops. Best tensioning performance available on the market! Patented vertical gripper motion allows for easy strap release and greater holding power. High quality casting ensures enhanced durability.

MUL-381, Heavy Duty Side Sealer, 3/4″

Heavy Duty Sealer for ¾” PET Strapping. Uniquely adjustable for strap thicknesses of
.040”, .050” or .060”.

EP-1185, Premium Poly Pusher Tensioner, 1/2″-3/4″

Unique design for use with round or irregular bundles.
Use with ½”, ⅝” or ¾” serrated closed seals.

EP-1225, Premium Front Action Sealer, 1/2″, 5/8″, 3/4″

Front action sealer for polypropylene strapping widths of ½”, ⅝” or ¾”. Specify strap width with order.

MUL350, Combination Tool for Polyester Strapping, 5/8″

Innovative combination tool that tensions, seals and cuts the strap in one operation. Ideal for applications where speed and consistency are important. Can be used on vertical and horizontal surfaces. Unique sealing mechanism provides superior joint strength. Works with standard open serrated seals.

 

MUL-351, Combination Tool for Polyester Strapping, 1/2″

Innovative combination tool that tensions, seals and cuts the strap in one operation. Ideal for applications where speed and consistency are important. Can be used on vertical and horizontal surfaces. Unique sealing mechanism provides superior joint strength. Works with standard open serrated seals.

 

MUL-340, Combination Strapping Tool, 1/2″

MUL-340 is an innovative combination 1/2″ polypropylene strapping tensioner-sealer-cutter. MUL-340 utilizes single seal side loading — tensions the strap, makes a seal joint, and cuts the strap — all in one tool. It can be used on small or large packages, horizontal and vertical surfaces. The MUL-340 works with inexpensive ST-340 seals.

Fromm P403 Manual Combo Tool for Non-Metallic Strapping

A lightweight combination tool for 1/2″ polypropylene and polyester strapping.

  • Manufactured in Europe
  • High tension windlass system
  • Tensions, seals and cuts
  • Uses Orgapack-style 1/2″ serrated seal
  • Weight: 7.3 lbs

Fromm P404 Manual Combo Tool for Non-Metallic Strapping

A lightweight combination tool for 5/8″ polypropylene and polyester strapping.

  • Manufactured in Europe
  • High tension windlass system
  • Tensions, seals and cuts
  • Uses Orgapack-style 5/8″ serrated seal
  • Weight: 8.4 lbs

Fromm P359, Pneumatic Polyester Strapping Tool, 3/4″ – 1 1/4”

Semi-automatic or manual mode. The buttons on the tool allow the operator to decide which feature best fits their strapping needs. Max. tension is 1,570 pounds, but that can also be adjusted based on each application.  P359 Fromm tool is one of the lightest weight pneumatic tools on the market, weighing only 19 pounds. The fact that it tensions, seals, and cuts all in the same tool saves operator energy and makes the process much more

Strapping from 3/4″- 1 1/4″

 

Fromm P355 Pneumatic Combo Tool for Non-Metallic Strapping

A pneumatic sealless combination tool for polyester and polypropylene strapping from 3/8″ to 5/8″ wide.

  • Manufactured in Europe
  • Easy strap threading
  • Adjustable tension range and sealing time
  • Adjustable strap for thickness
  • Weight: 10.5 lbs
  • Tension range: 90-470 lbs
  • Recommended air pressure: 80 psi

Fromm P356 Pneumatic Combo Tool for Polyester Strapping

A pneumatic sealless combination tool for heavy duty polyester strapping from 5/8″ to 3/4 wide.

  • Manufactured in Europe
  • Easy strap threading
  • Adjustable tension range and sealing time
  • Will accommodate strap up to .053″ thick
  • Weight: 11.9 lbs
  • Tension range: 180-830 lbs
  • Recommended air pressure: 80 psi

Fromm A390 Semi-Automatic Sealless Tool

A semi-automatic combination tool with pneumatic tension and mechanical sealing, for fast, effortless banding.

  • Manufactured in Europe
  • Strap type: standard duty
  • Strap width: ⅝” – ¾”
  • Strap thicknesses from .015” to .023”
  • The A391 is available for high tensile strapping

Fromm A391 Semi-Automatic Sealless Tool

A semi-automatic combination tool with pneumatic tension and mechanical sealing, for fast, effortless banding.

  • Manufactured in Europe
  • Strap type: high tensile
  • Strap width: ½” – ¾”
  • Strap thicknesses from .015″ to .023″

Fromm A380, Pneumatic Steel Combination Tool, 1/2″ – 1″ x .020 – .040 HT

The A380 is used mainly in the timber and construction material industry. The massively constructed tool is characterized in particular by its reliability in shift work and with continuous operation under the most rigorous conditions. Supplied as a semi and fully automatic model, it is also produced in four tensioning levels. It is recommended to use the tool in suspended mode.

Fromm A385 Fully-Automatic Sealless Tool

A fully-automatic combination tool with pneumatic tension and sealing, for fast, effortless banding.

  • Manufactured in Europe
  • Microlock seal joint prevents joint decoupling
  • Pneumatic operation for considerable time savings
  • Air motor drive yields high and constant tension
  • Four stages of tension and tension speed available
  • Strap type: standard duty and high tensile
  • Strap width: ⅜” – ¾”

Fromm A480, Pusher type combination steel strapping tool,

The pneumatic A480 Fromm combination steel strapping tool is used with 1/2″, 5/8″ and 3/4″steel strapping. Due to its low weight in comparison to other pneumatic push style combination tools, the Fromm A480 does not have to be suspended. This permits mobile operation. Ideal for strapping tubes, wire coils and all kinds of small bundles, the A480 is a handy and popular tool in numerous industries. This tool uses push- seals which are ideal for round and narrow packages. The seal is pushed by the tool with the steel strap threaded through to pull the tension.

Fromm A482, Pneumatic Steel Combination Tool, 3/4″ x .025 – .035 HT

Due to its low weight the A482 does not necessarily have to be suspended. Straps of up to .035″ thickness can be processed. The perfect double notch up cut seal joint guarantees a strength of 75%. The modern A482 optimizes the strapping of packages, mainly in the metal industry.

Fromm A452, Pneumatic Pusher Type Tensioner, 3/4″ – 1-1/4″ x .025 – .050 HT

The Pneumatic pusher type tensioner A452 is characterized by its very high strap tension force of 8500 N. Thanks to its free-wheeling system, no strap tension is lost on completion of the tensioning cycle. This extremely rugged, fast and lightweight tool is suitable for both mobile and stationary applications.

Fromm A461, Pneumatic Single-hand Sealer, 3/4″ – 1-1/4″ x .025 – .040 HT

Pneumatic single-hand sealer A461 is used for joints and can be operated single-handed. It is fitted with a safety mechanism which prevents poor seal joints resulting from faulty operation.

MUL-420, Feedwheel Tensioner, 3/4”-1-1/4”

Heavy duty tensioner for high tensile steel strapping. European-made for exceptional performance in demanding applications. Needle bearings for maximum tension. Quick access to all wear parts for easy maintenance.

MUL-430, HD Heavy Duty Dual-Action Double-Notch Sealer, 1-1/4”

European design for speed, reliability and ease of use in heavy applications. Patented two-stage jaw action reduces sealing effort by 50%.

Teknika S-290

  • EconomyFeedwheel Tensioner
  • Unlimited take-up
  • For Flat Package Loads
  • For Strap Widths ⅜” – ¾”
  • For Strap Gauges .018 – .023

Teknika S-296

  • Standard Duty Feedwheel Tensioner
  • Unlimited take-up
  • For Flat Package Loads
  • For Strap Widths ⅜” – ¾”
  • For Strap Gauges .018 – .023

Teknika S-298

  • Heavy Duty Feedwheel Tensioner
  • Unlimited take-up
  • For Flat Package Loads
  • For Strap Widths ⅝” – 1-¼”
  • For Strap Gauges .023” – .031”HT

EP-1810, Economy Front Action Sealer, 1/2″, 5/8″, and 3/4″

Double-Notch, Down-Cut
For Strap Width 1/2″, 5/8″, and 3/4″
For Strap Gauges .018 to .023
Regular Duty Strapping

EP-1820, Single Notch Sealer, 1/2” x .020” to 3/4” x .023″

For use with a pusher tensioner and seals, on steel strapping from 1/2” x .020” to 3/4” x .023”. Specify strap width with order. Made in USA.

EP-1850, Front-Action Double-Notch Sealer, 3/4”

For use with 3/4” high tensile strapping and heavy duty seals.

EP-1800, Conventional Double Notch Sealer,1/2” x .020” to 3/4” x .023”

For use with standard open seals on steel strapping from 1/2” x .020” to 3/4” x .023”. Specify strap width with order. Made in USA.

EP-1870, Heavy Duty Side Action Sealer, 3/4″

Double notch down-cut with open or closed seals.

Strap width: 3/4″

Strap gauges: .025 to .035

EP-1880, HD Side-Action Single-Notch Sealer, 3/4” and 1-1/4”

For use with high tensile strapping and heavy duty seals. Specify strap width with order.

EP-2400, Economy Strap Shears, 3/8″ – 3/4″

Single Hand Operated
Strap Widths 3/8″ – 3/4″
For Strap Gauges up to .028

EP-2500, Heavy Duty Strap Shears, 3/4″ – 2″

Two Hand Operated
Strap Widths 3/4″ – 2″
For Strap Gauges up to .044

EP-1400

Compact tensioner for lighter weights of regular duty steel strapping.

• Compact -Light Duty Feedwheel Tensioner
• Made in USA
• Unlimited take-up
• For Flat Package Loads
• For Strap Widths ⅜” – ¾”
• For Strap Gauges .018 – .023

EP-1425

• Standard Duty Feedwheel Tensioner
• Made in USA
• Unlimited take-up
• For Flat Package Loads
For Strap Widths ⅜” – ¾”
For Strap Gauges .018 – .025 HT

EP-1450

• Heavy Duty Feedwheel Tensioner
• Unlimited take-up
• For Flat Package Loads
• For Strap Widths ¾” – 1-¼”
• For Strap Gauges .025” – .031” HT

EP-1600, Feedwheel Pusher Tool, 5/8” – 1-1/4”

Infinite take-up for bundling round and irregular products.

EP-1650, Rack and Pinion Pusher Tool, 5/8” – 1-1/4”

Conventional pusher tool for bundling round and irregular products.

EP-1500

  • Economy Windlass Tensioner
  • Limited take-up
  • For Flat Package Loads
  • For Strap Widths ¾” – 1-¼”
  • For Strap Gauges .023” – .031”HT

EP-1525, Premium Windlass Tensioner, 3/4 – 1-1/4”

Windlass tensioner for 3/4” and 1-1/4” (.025” – .031”) high tensile steel strapping.

D-53RS, SEMI-AUTOMATIC TIRE STRAPPING MACHINE

The D-53RS is a side-seal version of the D-53 especially designed to strap donut-shaped bundles such as tires, wires, tubes and hoses. The two supporting bars rotate, making it easy to position the bundle with little effort. The strap feeding buttons are located on the both sides of the machine to enable easy operation from either side.

EP-3100 Premium Mobile Dispenser

  • For oscillated wound strapping on a 16″ ID core.
  • All steel construction.
  • Spring activated reel brake.
  • Large tray for tools and fasteners.
  • Ten inch OD wheels.

EP-3080 Economy Mobile Dispenser

  • For plastic strapping on a 16″ x 6″
  • 8” x 8” core on special request.
  • All steel construction.
  • Quick load reel shaft stopper.
  • Large tray for tools and fasteners.
  • Ten inch OD wheels.

EP-3200 Premium Dispenser with Strap Troller

  • For oscillated wound strapping on a 16″ ID core.
  • All steel construction.
  • Reel brake strap troller.
  • Large tray for tools and fasteners.
  • Ten inch OD wheels.

EP-3340 RW Mobile Dispenser

  • For HT ribbon wound strapping, ¾” or 1-¼”.
  • All steel construction.
  • Strap troller reel brake.
  • Quick load reel shaft stopper.
  • Large tray for tools and fasteners.
  • Ten inch wheels.

EP-3400 Heavy Duty RW Mobile Dispenser

  • For ribbon wound strapping, 1-¼” or 2″.
  • Robust steel tubing design.
  • Strap troller reel brake.
  • Quick load reel shaft stopper.
  • Two oversize tool trays.
  • 18 inch pneumatic tires.

EP-3020 Stationary Dispenser

  • All steel construction.
  • Spring-activated brake.
  • Face width up to 8”.
  • Wall/floor/table mountable.

EP-3045 Mobile Dispenser

  • All steel construction.
  • Large tray for tools and fasteners.
  • Spring-activated brake.
  • Face width up to 8”.
  • Disk Inserts for 1 ½”, 3″, 6″, and 8″ Core I.D.s.
  • Ten inch OD wheels.
  • Quick load reel shaft stopper.

EP-3010 Mobile Dispenser

  • For oscillated wound strapping
  • All steel construction.
  • Large tray for tools and fasteners
  • Face width up to 8”.
  • Disk Inserts for 1 ½”, 3″, 6″, and 8″ core I.D.s.
  • Six inch OD wheels.
  • Quick load reel shaft stopper.
  • Lightweight for easy mobility.

EP-3035 Wall Mount Dispenser

  • For oscillated wound strapping
  • All steel construction.
  • Spring-activated brake.
  • Face width up to 8″.
  • Disk Inserts for 1 ½”, 3″, 6″, and 8″ Core I.D.s.
  • Quick load reel shaft stopper
  • Fork Lift Mountable.
  • Optional Tool Tray Available.

EP-3040 RW Mobile Dispenser

  • For ribbon wound strapping.
  • All steel construction.
  • Spring-activated brake.
  • Quick load reel shaft stopper.
  • Large tray for tools and fasteners.
  • Eight inch wheels.

EP-3030 RW Wall Mount Dispenser

  • For ribbon wound strapping.
  • All steel construction.
  • Spring-activated brake.
  • Quick load reel shaft stopper.
  • Fork Lift Mountable.
  • Optional Tool Tray Available.