Dynamic 2100 Combination Tool for 1/2”, 5/8” and 3/4” Polyester Strapping – Made by Fromm

The Dynamic 2100 is an economical battery-powered strapping tool for medium duty applications. Its simple analog controls make it very easy for any operator to adjust the tension and weld-time, as necessary. Its versatile design allows it to be used for a broad range of strapping tasks, and provides an efficient and cost effective alternative to using metal strapping and seals.

Features are as follows:

• Simple analog tension and weld time adjustments
• Adjustable strap tension from 146 lbf to 675 lbf
• Adjustable sealing time for perfect welds
• Latest technology 14.4 volt 3.0 Ah Li-ion battery
• Easy strap threading – both straps are inserted together.
• Weight, with battery: 5 lbs
• Designed and manufactured in Italy by Fromm

Fromm P328 Combination Tool for ½” and ⅝” polyester and nylon strapping

The P328 battery powered strapping tool is Fromm’s latest design for medium to heavy duty applications. This ergonomic tool is easy to use for a broad range of strapping tasks, and provides an efficient and cost effective alternative to using metal strapping and seals.

Features are as follows:

• Tensions, seals and cuts strapping
• Tension and sealing time adjustable with simple knobs
• Tension force up to 2600N / 585 lbs
• Quick and easy one-handed operation
• Brushless motor for less maintenance and longer life
• Motor temperature monitoring to protect motor from overheating
• Battery is well protected
• Battery charge indicator included

Fromm P329 Combination Tool for ⅝” and ¾” polyester and nylon strapping

Fromm’s workhorse tool for heavy duty strapping applications. The P329 provides an efficient and cost effective alternative to the use of steel strapping. This tool is designed for challenging applications such as securing heavy pallets, large loads and lumber.

Features are as follows:

• Tensions, seals and cuts strapping
• Tension and sealing time adjustable with simple knobs
• Tension force up to 4000N / 900 lbs
• Quick and easy one-handed operation
• Brushless motor for less maintenance and longer life
• Motor temperature monitoring to protect motor from overheating
• Battery is well protected
• Battery charge indicator included

FROMM P331 Combination Tool for ¾” to 1-¼” heavy duty polyester strapping

The P331 is Fromm’s latest model of heavy duty battery tool. A very powerful tool for handling strapping widths up to 1-¼”. With tension adjustable up to 1,575 lbs, this tool can be used to replace heavy duty steel strapping applications, in order to generate major cost savings.

Features are as follows:

• Adjustable strap tension from 270 lbf to 1,575 lbf
• Adjustable sealing time for perfect welds
• Strap widths: ¾” – 1-¼”
• Strap thicknesses: .024” – .060”
• Power supply: Latest 36.0 volt 4.0 Ah Li-ion battery technology
• Tensioning speed: 1.5 – 2.5 inches per second
• Easy strap threading – both straps are inserted together.
• Brushless motor for less maintenance

Itatool B2000 Combination Tool for 1” and 1-¼” polyester strapping

A rugged, high tension, combination tool for wide, heavy duty, polyester strapping. The 36 volt battery provides all of the power needed to apply maximum force to large loads. Can be used with polyester strapping to replace 1-¼” steel strapping in many applications.

Features are as follows:

• Powered by a 36 volt Bosch Li-ion battery
• Strap tension up to 2,000 lbs
• Simple one-button operation
• Intuitive controls for setting mode, tension and welding time
• Three mode settings: Automatic, semi-automatic and manual
• Strap thickness: from .031” up to .055”
• Weight, with battery: 13.8 lbs

Teknika MUL-325 Tensioner for Composite, Cord and Textile Strapping

The MUL-325 is an advanced tensioner for all types of Cordstrap, GatorStrap, composite and woven strapping. The patented gripping mechanism holds and releases strap with a vertical motion, providing increased holding power and reduced wear.

• For ½”, ⅝” and ¾” strap widths
• Lightweight and ergonomic at 4 lbs
• Patented cutter design
• Patented gripper mechanism

Teknika MUL-375 HD Tensioner for Composite, Cord and Textile Strapping

With the same features as the MUL-325 installed on a larger, more rugged, frame, the MUL-375 is the finest mechanical tensioner available for working with heavy duty Cordstrap, GatorStrap, composite and woven strapping.

• For strap widths from ¾” to 1-⅝”
• Engineered for high tension applications
• Patented cutter design
• Patented gripper mechanism

Zulu Bar Tensioner for Composite, Cord and Textile Strapping

A simple lever-style tensioner with no moving parts. Designed for securing large loads such as lumber, pipe and trusses.

• For strap widths up to 2”

Gator Kit Portable Kit for Securing Loads with GatorStrap

A convenient strapping kit contained in a heavy duty gym bag for maximum portability. Complete with the following accessories:

• Two 250’ rolls of GatorStrap
• 60 buckles
• One Zulu Bar tensioner
• One strapping cutter
• Instructions

ZAPAK ZP97A Combination Tool for ⅝” and ¾” polyester and nylon strapping

The ZP97A is Zapak’s new heavy duty battery tool. With features found in the most costly battery powered strapping tools, the ZP97A is among the least expensive tools in its class. This tool has been engineered and manufactured in Taiwan to the highest standards of quality. The reliability and durability of this tool is backed up by a three year warranty.

Features are as follows:

• Intuitive touch screen panel for easy adjustments
• Adjustable strap tension from 88 lbf to 880 lbf
• Adjustable sealing time for perfect welds
• Powered by Bosch 18.0 volt 4.0 Ah Li-ion battery for more cycles per charge
• Patented strap grippers enable higher tension
• Patented brushless motor produced by Zapak for long service life
• High precision micro bearings for reduced friction and greater longevity
• Easy strap threading – both straps are inserted together.
• Three year factory warranty on motor and electronic control unit.

ZAPAK ZP93A Combination Tool for ½” and ⅝” polyester and polypropylene strapping

The ZP93A is Zapak’s new medium range battery tool. With features found in the most costly battery powered strapping tools, the ZP93A is among the least expensive tools on the market. This tool has been engineered and manufactured in Taiwan to the highest standards of quality. The reliability and durability of this tool is backed up by a three year warranty.

Features are as follows:

• Intuitive touch screen panel for easy adjustments
• Adjustable strap tension from 22 lbf to 550 lbf
• Adjustable sealing time for perfect welds
• Soft tension mode for light and fragile items
• Powered by Bosch 18.0 volt 4.0 Ah Li-ion battery
• Patented strap grippers enable higher tension
• Patented brushless motor produced by Zapak for long service life
• High precision micro bearings for reduced friction and greater longevity
• Easy strap threading – both straps are inserted together.
• Weight, with battery: 5 lbs. Lightest in the industry.
• Three year factory warranty on motor and electronic control unit.

ZAPAK SW25A Strapping Welder for ½” to 1” polyester and polypropylene strapping

The SW25A is Zapak’s new solution for rapidly sealing a wide range of Polyester and Polypropylene strapping.This lightweight tool eliminates costly and time consuming metal seals

Features are as follows:

• Weight, with battery: less than 5 lbs. Lightest in the industry.
• Powered by 18 volt, 4 ah Bosch Battery, for more that 500 seals per charge.
• Complete with Bosch charger.
• Works perfectly with any manual tensioner.
• Excellent backup for costly battery-powered combination tools.
• Can apply multiple welds for difficult sealing applications.

Signode GripPack Battery Powered Tensioner for ¾” and 1-¼” HT strapping

A lightweight, ergonomic, battery-powered pusher tool for a totally portable banding operation.

• 18 volt Li-ion battery
• 120 cycles per charge
• Charge level indicator
• One touch operation
• Adjustable tension
• For strap thickness from .025” to .031

Signode GripPack Battery Powered Sealer for ¾” and 1-¼” HT strapping

A lightweight, ergonomic, battery-powered sealer for a totally portable banding operation.

• 18 volt Li-ion battery
• 240 single notches per charge
• Charge level indicator
• One button operation
• Illuminated sealing area
• Strap detection system
• For strap thickness from .025” to .031

Teknika MUL-16, Combination Tool, for ½”, ⅝”or ¾” strapping

An economical sealless tool for regular duty steel strapping, with thicknesses from .015” to .023”.

• Manufactured in Europe
• Reversible dies
• Ergonomic design
• Exceptional value
• Inexpensive and easy to operate

Teknika MUL-20, Combination Tool, for ½”, ⅝”or ¾” strapping

A sealless combination tool for high tensile and regular duty steel strapping, with thicknesses from .020″ to .025″.

• Our most popular sealless tool
• Manufactured in Europe
• Reversible dies
• Easy replacement of wear parts
• Ergonomic design
• Designed to minimize damage from drops

ZL90 Sealless Combination Tool for 1-¼” HT strapping

This is the only sealless combination tool designed for use with 1-¼” high tensile strapping. The Z-Lock feature prevents the seal joint from decoupling if the strapping becomes loose.

• Manufactured in Canada
• Patented seal joint design
• Z-Lock reverse locking system
• Simple replacement of wear parts
• For strap thicknesses from .025” to .031”

ZL31 Sealless Combination Tool for Demanding Applications

The ZL31 is specifically designed for use with heavy duty high tensile strapping. Z-Lock prevents the seal joint from decoupling if the strapping becomes loose.

• Manufactured in Canada
• Patented seal joint design
• Z-Lock reverse locking system
• Simple replacement of wear parts
• Strap type: ¾” high tensile
• Strap thicknesses from .025″ to .031″

ZL25 Sealless Combination Tool for Demanding Applications

The ZL25 is specifically designed for use with high tensile strapping. The Z-Lock prevents the seal joint from de-coupling if the strapping becomes loose.

• Manufactured in Canada
• Patented seal joint design
• Z-Lock reverse locking system
• Simple replacement of wear parts
• Strap widths: ½”, ⅝”, ¾”
• Strap thicknesses from .015″ to .025″

MS31 Sealless Combination Tool for Heavy Duty Applications

The MS31 is designed for use with heavy duty high tensile strapping up to ¾” x .031”.

• Manufactured in Canada
• Patented seal joint design
• Simple replacement of wear parts
• Strap type: ¾” high tensile
• Strap thicknesses from .025″ to .031″

MS-25, Combination Tool 3/8″, 1/2″, 5/8″, & 3/4″

ZR MS25 Manual sealless combination tool for high tensile steel strapping. For sizes 3/8″, 1/2″, 5/8″ & 3/4″ – .015″ – .025 HT

TF25 Sealless Combination Tool for General Applications

For use with all types of steel-based strapping.

• Manufactured in Canada
• Patented seal joint design
• Strap widths: ½”, ⅝”, ¾”
• Strap thicknesses from .015” to .025”

Fromm A335 Combination Tool for General Applications

Handy lightweight sealless combination tool for strapping flat packages (i.e. pallets, bales, crates, cases and various packages).

• Manufactured in Europe
• Rugged and highly reliable
• Strap type: standard duty
• Strap width: ½” – ¾”
• Strap thickness: .020” to .023”

Fromm A337 Combination Tool for Challenging Applications

An ideal tool for a wide range of vertical and horizontal strapping applications for flat goods in almost all industries.

• Manufactured in Europe
• Microlock seal joint prevents joint decoupling
• Free wheeling system for high tension
• Strap type: standard duty and high tensile
• Strap width: ⅜” – ¾”
• Strap thicknesses from .015” to .025”

Fromm A338 Combination Tool for High Tension Applications

A sealless  tool designed for applying high tension to a wide array of flat packages.

• Manufactured in Europe
• Geared for high strap tension
• Strap type: standard duty and high tensile
• Strap width: ½” – ¾”
• Strap thickness: .020” to .028”

MUL-320, Tensioner, 3/4″

The MUL-320 is an advanced PET/PP tensioner for heavy duty applications. The patented gripping mechanism grips and releases strap with a vertical motion, providing increased holding power and reduced wear. The patented tension drum aligns automatically for easy strap threading

MUL-330 Offset Sealer, 5/8″

The MUL-330 is an advanced patented PET sealer for heavy duty applications. The staggered, symmetrical jaws eliminate the need to orient the tool on the non-symmetrical, Orgapack-type, seal. Unique jaw design allows minimal clearance between seal and package surface.

MUL-331, Heavy Duty Sealer, 1/2″

The MUL-331 has the same patented jaw design as the MUL-330, but accommodates the ½” Orgapack-type seal.

MUL-370, Heavy Duty Wide Strapping Tensioner, 1-1/4″

Advanced, patented design with superior performance in the heaviest PET applications for strapping up to 1-1/4″ (32mm). All steel construction minimizes damage from accidental drops. Best tensioning performance available on the market! Patented vertical gripper motion allows for easy strap release and greater holding power. High quality casting ensures enhanced durability.

MUL-381, Heavy Duty Side Sealer, 3/4″

Heavy Duty Sealer for ¾” PET Strapping. Uniquely adjustable for strap thicknesses of
.040”, .050” or .060”.

EP-1185, Premium Poly Pusher Tensioner, 1/2″-3/4″

Unique design for use with round or irregular bundles.
Use with ½”, ⅝” or ¾” serrated closed seals.

EP-1225, Premium Front Action Sealer, 1/2″, 5/8″, 3/4″

Front action sealer for polypropylene strapping widths of ½”, ⅝” or ¾”. Specify strap width with order.

MUL350, Combination Tool for Polyester Strapping, 5/8″

Innovative combination tool that tensions, seals and cuts the strap in one operation. Ideal for applications where speed and consistency are important. Can be used on vertical and horizontal surfaces. Unique sealing mechanism provides superior joint strength. Works with standard open serrated seals.

MUL-351, Combination Tool for Polyester Strapping, 1/2″

Innovative combination tool that tensions, seals and cuts the strap in one operation. Ideal for applications where speed and consistency are important. Can be used on vertical and horizontal surfaces. Unique sealing mechanism provides superior joint strength. Works with standard open serrated seals.

MUL-341, Combination Strapping Tool, 1/2″

MUL-341 is an innovative combination 1/2″ polypropylene strapping tensioner-sealer-cutter. MUL-341 utilizes single seal side loading — tensions the strap, makes a seal joint, and cuts the strap — all in one tool. It can be used on small or large packages, horizontal and vertical surfaces. The MUL-341 works with inexpensive ST-340 seals.

Fromm P403 Manual Combo Tool for Non-Metallic Strapping

A lightweight combination tool for 1/2″ polypropylene and polyester strapping.

• Manufactured in Europe
• High tension windlass system
• Tensions, seals and cuts
• Uses Orgapack-style 1/2″ serrated seal
• Weight: 7.3 lbs

Fromm P404 Manual Combo Tool for Non-Metallic Strapping

A lightweight combination tool for 5/8″ polypropylene and polyester strapping.

• Manufactured in Europe
• High tension windlass system
• Tensions, seals and cuts
• Uses Orgapack-style 5/8″ serrated seal
• Weight: 8.4 lbs

Fromm P359, Pneumatic Polyester Strapping Tool, 3/4″ – 1 1/4”

Semi-automatic or manual mode. The buttons on the tool allow the operator to decide which feature best fits their strapping needs. Max. tension is 1,570 pounds, but that can also be adjusted based on each application.  P359 Fromm tool is one of the lightest weight pneumatic tools on the market, weighing only 19 pounds. The fact that it tensions, seals, and cuts all in the same tool saves operator energy and makes the process much more

Strapping from 3/4″- 1 1/4″

Fromm P355 Pneumatic Combo Tool for Non-Metallic Strapping

A pneumatic sealless combination tool for polyester and polypropylene strapping from 3/8″ to 5/8″ wide.

• Manufactured in Europe
• Easy strap threading
• Adjustable tension range and sealing time
• Adjustable strap for thickness
• Weight: 10.5 lbs
• Tension range: 90-470 lbs
• Recommended air pressure: 80 psi

Fromm P356 Pneumatic Combo Tool for Polyester Strapping

A pneumatic sealless combination tool for heavy duty polyester strapping from 5/8″ to 3/4 wide.

• Manufactured in Europe
• Easy strap threading
• Adjustable tension range and sealing time
• Will accommodate strap up to .053″ thick
• Weight: 11.9 lbs
• Tension range: 180-830 lbs
• Recommended air pressure: 80 psi

Fromm A390 Semi-Automatic Sealless Tool

A semi-automatic combination tool with pneumatic tension and mechanical sealing, for fast, effortless banding.

• Manufactured in Europe
• Strap type: standard duty
• Strap width: ⅝” – ¾”
• Strap thicknesses from .015” to .023”
• The A391 is available for high tensile strapping

Fromm A391 Semi-Automatic Sealless Tool

A semi-automatic combination tool with pneumatic tension and mechanical sealing, for fast, effortless banding.

• Manufactured in Europe
• Strap type: high tensile
• Strap width: ½” – ¾”
• Strap thicknesses from .015″ to .023″

Fromm A380, Pneumatic Steel Combination Tool, 1/2″ – 1″ x .020 – .040 HT

The A380 is used mainly in the timber and construction material industry. The massively constructed tool is characterized in particular by its reliability in shift work and with continuous operation under the most rigorous conditions. Supplied as a semi and fully automatic model, it is also produced in four tensioning levels. It is recommended to use the tool in suspended mode.

Fromm A385 Fully-Automatic Sealless Tool

A fully-automatic combination tool with pneumatic tension and sealing, for fast, effortless banding.

• Manufactured in Europe
• Microlock seal joint prevents joint decoupling
• Pneumatic operation for considerable time savings
• Air motor drive yields high and constant tension
• Four stages of tension and tension speed available
• Strap type: standard duty and high tensile
• Strap width: ⅜” – ¾”

Fromm A480, Pusher type combination steel strapping tool,

The pneumatic A480 Fromm combination steel strapping tool is used with 1/2″, 5/8″ and 3/4″steel strapping. Due to its low weight in comparison to other pneumatic push style combination tools, the Fromm A480 does not have to be suspended. This permits mobile operation. Ideal for strapping tubes, wire coils and all kinds of small bundles, the A480 is a handy and popular tool in numerous industries. This tool uses push- seals which are ideal for round and narrow packages. The seal is pushed by the tool with the steel strap threaded through to pull the tension.

Fromm A482, Pneumatic Steel Combination Tool, 3/4″ x .025 – .035 HT

Due to its low weight the A482 does not necessarily have to be suspended. Straps of up to .035″ thickness can be processed. The perfect double notch up cut seal joint guarantees a strength of 75%. The modern A482 optimizes the strapping of packages, mainly in the metal industry.

Fromm A452, Pneumatic Pusher Type Tensioner, 3/4″ – 1-1/4″ x .025 – .050 HT

The Pneumatic pusher type tensioner A452 is characterized by its very high strap tension force of 8500 N. Thanks to its free-wheeling system, no strap tension is lost on completion of the tensioning cycle. This extremely rugged, fast and lightweight tool is suitable for both mobile and stationary applications.

Fromm A461, Pneumatic Single-hand Sealer, 3/4″ – 1-1/4″ x .025 – .040 HT

Pneumatic single-hand sealer A461 is used for joints and can be operated single-handed. It is fitted with a safety mechanism which prevents poor seal joints resulting from faulty operation.

MUL-420, Feedwheel Tensioner, 3/4”-1-1/4”

Heavy duty tensioner for high tensile steel strapping. European-made for exceptional performance in demanding applications. Needle bearings for maximum tension. Quick access to all wear parts for easy maintenance.

MUL-430, HD Heavy Duty Dual-Action Double-Notch Sealer, 1-1/4”

European design for speed, reliability and ease of use in heavy applications. Patented two-stage jaw action reduces sealing effort by 50%.

Teknika S-290

• EconomyFeedwheel Tensioner
• Unlimited take-up
• For Flat Package Loads
• For Strap Widths ⅜” – ¾”
• For Strap Gauges .018 – .023

Teknika S-296

• Standard Duty Feedwheel Tensioner
• Unlimited take-up
• For Flat Package Loads
• For Strap Widths ⅜” – ¾”
• For Strap Gauges .018 – .023

Teknika S-298

• Heavy Duty Feedwheel Tensioner
• Unlimited take-up
• For Flat Package Loads
• For Strap Widths ⅝” – 1-¼”
• For Strap Gauges .023” – .031”HT

EP-1810, Economy Front Action Sealer, 1/2″, 5/8″, and 3/4″

Double-Notch, Down-Cut
For Strap Width 1/2″, 5/8″, and 3/4″
For Strap Gauges .018 to .023
Regular Duty Strapping

EP-1820, Single Notch Sealer, 1/2” x .020” to 3/4” x .023″

For use with a pusher tensioner and seals, on steel strapping from 1/2” x .020” to 3/4” x .023”. Specify strap width with order. Made in USA.

EP-1850, Front-Action Double-Notch Sealer, 3/4”

For use with 3/4” high tensile strapping and heavy duty seals.

EP-1800, Conventional Double Notch Sealer,1/2” x .020” to 3/4” x .023”

For use with standard open seals on steel strapping from 1/2” x .020” to 3/4” x .023”. Specify strap width with order. Made in USA.

EP-1870, Heavy Duty Side Action Sealer, 3/4″

Double notch down-cut with open or closed seals.

Strap width: 3/4″

Strap gauges: .025 to .035

EP-1880, HD Side-Action Single-Notch Sealer, 3/4” and 1-1/4”

For use with high tensile strapping and heavy duty seals. Specify strap width with order.

EP-2400, Economy Strap Shears, 3/8″ – 3/4″

Single Hand Operated
Strap Widths 3/8″ – 3/4″
For Strap Gauges up to .028

EP-2500, Heavy Duty Strap Shears, 3/4″ – 2″

Two Hand Operated
Strap Widths 3/4″ – 2″
For Strap Gauges up to .044

EP-1400

Compact tensioner for lighter weights of regular duty steel strapping.

• Compact -Light Duty Feedwheel Tensioner
• Made in USA
• Unlimited take-up
• For Flat Package Loads
• For Strap Widths ⅜” – ¾”
• For Strap Gauges .018 – .023

EP-1425

• Standard Duty Feedwheel Tensioner
• Made in USA
• Unlimited take-up
• For Flat Package Loads
For Strap Widths ⅜” – ¾”
For Strap Gauges .018 – .025 HT

EP-1450

• Heavy Duty Feedwheel Tensioner
• Unlimited take-up
• For Flat Package Loads
• For Strap Widths ¾” – 1-¼”
• For Strap Gauges .025” – .031” HT

EP-1600, Feedwheel Pusher Tool, 5/8” – 1-1/4”

Infinite take-up for bundling round and irregular products.

EP-1650, Rack and Pinion Pusher Tool, 5/8” – 1-1/4”

Conventional pusher tool for bundling round and irregular products.

EP-1500

• Economy Windlass Tensioner
• Limited take-up
• For Flat Package Loads
• For Strap Widths ¾” – 1-¼”
• For Strap Gauges .023” – .031”HT

EP-1525, Premium Windlass Tensioner, 3/4 – 1-1/4”

Windlass tensioner for 3/4” and 1-1/4” (.025” – .031”) high tensile steel strapping.

EP-3100 Premium Mobile Dispenser

• For oscillated wound strapping on a 16″ ID core.
• All steel construction.
• Spring activated reel brake.
• Large tray for tools and fasteners.
• Ten inch OD wheels.

EP-3080 Economy Mobile Dispenser

• For plastic strapping on a 16″ x 6″
• 8” x 8” core on special request.
• All steel construction.
• Quick load reel shaft stopper.
• Large tray for tools and fasteners.
• Ten inch OD wheels.

EP-3200 Premium Dispenser with Strap Troller

• For oscillated wound strapping on a 16″ ID core.
• All steel construction.
• Reel brake strap troller.
• Large tray for tools and fasteners.
• Ten inch OD wheels.

EP-3340 RW Mobile Dispenser

• For HT ribbon wound strapping, ¾” or 1-¼”.
• All steel construction.
• Strap troller reel brake.
• Quick load reel shaft stopper.
• Large tray for tools and fasteners.
• Ten inch wheels.

EP-3400 Heavy Duty RW Mobile Dispenser

• For ribbon wound strapping, 1-¼” or 2″.
• Robust steel tubing design.
• Strap troller reel brake.
• Quick load reel shaft stopper.
• Two oversize tool trays.
• 18 inch pneumatic tires.

EP-3020 Stationary Dispenser

• All steel construction.
• Spring-activated brake.
• Face width up to 8”.
• Wall/floor/table mountable.

EP-3045 Mobile Dispenser

• All steel construction.
• Large tray for tools and fasteners.
• Spring-activated brake.
• Face width up to 8”.
• Disk Inserts for 1 ½”, 3″, 6″, and 8″ Core I.D.s.
• Ten inch OD wheels.
• Quick load reel shaft stopper.

EP-3035 Wall Mount Dispenser

• For oscillated wound strapping
• All steel construction.
• Spring-activated brake.
• Face width up to 8″.
• Disk Inserts for 1 ½”, 3″, 6″, and 8″ Core I.D.s.
• Quick load reel shaft stopper
• Fork Lift Mountable.
• Optional Tool Tray Available.

EP-3040 RW Mobile Dispenser

• For ribbon wound strapping.
• All steel construction.
• Spring-activated brake.
• Quick load reel shaft stopper.
• Large tray for tools and fasteners.
• Eight inch wheels.

EP-3030 RW Wall Mount Dispenser

• For ribbon wound strapping.
• All steel construction.
• Spring-activated brake.
• Quick load reel shaft stopper.
• Fork Lift Mountable.
• Optional Tool Tray Available.