Signode GripPack Battery Powered Tensioner for ¾” and 1-¼” HT strapping

A lightweight, ergonomic, battery-powered pusher tool for a totally portable banding operation.

  • 18 volt Li-ion battery
  • 120 cycles per charge
  • Charge level indicator
  • One touch operation
  • Adjustable tension
  • For strap thickness from .025” to .031

Signode GripPack Battery Powered Sealer for ¾” and 1-¼” HT strapping

A lightweight, ergonomic, battery-powered sealer for a totally portable banding operation.

  • 18 volt Li-ion battery
  • 240 single notches per charge
  • Charge level indicator
  • One button operation
  • Illuminated sealing area
  • Strap detection system
  • For strap thickness from .025” to .031

Teknika MUL-16, Combination Tool, for ½”, ⅝”or ¾” strapping

An economical sealless tool for regular duty steel strapping, with thicknesses from .015” to .023”.

  • Manufactured in Europe
  • Reversible dies
  • Ergonomic design
  • Exceptional value
  • Inexpensive and easy to operate

Teknika MUL-20, Combination Tool, for ½”, ⅝”or ¾” strapping

A sealless combination tool for high tensile and regular duty steel strapping, with thicknesses from .020″ to .025″.

  • Our most popular sealless tool
  • Manufactured in Europe
  • Reversible dies
  • Easy replacement of wear parts
  • Ergonomic design
  • Designed to minimize damage from drops

ZL90 Sealless Combination Tool for 1-¼” HT strapping

This is the only sealless combination tool designed for use with 1-¼” high tensile strapping. The Z-Lock feature prevents the seal joint from decoupling if the strapping becomes loose.

  • Manufactured in Canada
  • Patented seal joint design
  • Z-Lock reverse locking system
  • Simple replacement of wear parts
  • For strap thicknesses from .025” to .031”

ZL31 Sealless Combination Tool for Demanding Applications

The ZL31 is specifically designed for use with heavy duty high tensile strapping. Z-Lock prevents the seal joint from decoupling if the strapping becomes loose.

  • Manufactured in Canada
  • Patented seal joint design
  • Z-Lock reverse locking system
  • Simple replacement of wear parts
  • Strap type: ¾” high tensile
  • Strap thicknesses from .025″ to .031″

ZL25 Sealless Combination Tool for Demanding Applications

The ZL25 is specifically designed for use with high tensile strapping. The Z-Lock prevents the seal joint from de-coupling if the strapping becomes loose.

  • Manufactured in Canada
  • Patented seal joint design
  • Z-Lock reverse locking system
  • Simple replacement of wear parts
  • Strap widths: ½”, ⅝”, ¾”
  • Strap thicknesses from .015″ to .025″

MS31 Sealless Combination Tool for Heavy Duty Applications

The MS31 is designed for use with heavy duty high tensile strapping up to ¾” x .031”.

  • Manufactured in Canada
  • Patented seal joint design
  • Simple replacement of wear parts
  • Strap type: ¾” high tensile
  • Strap thicknesses from .025″ to .031″

MS-25, Combination Tool 3/8″, 1/2″, 5/8″, & 3/4″

ZR MS25 Manual sealless combination tool for high tensile steel strapping. For sizes 3/8″, 1/2″, 5/8″ & 3/4″ – .015″ – .025 HT

TF25 Sealless Combination Tool for General Applications

For use with all types of steel-based strapping.

• Manufactured in Canada
• Patented seal joint design
• Strap widths: ½”, ⅝”, ¾”
• Strap thicknesses from .015” to .025”

Fromm A335 Combination Tool for General Applications

Handy lightweight sealless combination tool for strapping flat packages (i.e. pallets, bales, crates, cases and various packages).

  • Manufactured in Europe
  • Rugged and highly reliable
  • Strap type: standard duty
  • Strap width: ½” – ¾”
  • Strap thickness: .020” to .023”

Fromm A337 Combination Tool for Challenging Applications

An ideal tool for a wide range of vertical and horizontal strapping applications for flat goods in almost all industries.

  • Manufactured in Europe
  • Microlock seal joint prevents joint decoupling
  • Free wheeling system for high tension
  • Strap type: standard duty and high tensile
  • Strap width: ⅜” – ¾”
  • Strap thicknesses from .015” to .025”

Fromm A338 Combination Tool for High Tension Applications

A sealless  tool designed for applying high tension to a wide array of flat packages.

  • Manufactured in Europe
  • Geared for high strap tension
  • Strap type: standard duty and high tensile
  • Strap width: ½” – ¾”
  • Strap thickness: .020” to .028”

Fromm A390 Semi-Automatic Sealless Tool

A semi-automatic combination tool with pneumatic tension and mechanical sealing, for fast, effortless banding.

  • Manufactured in Europe
  • Strap type: standard duty
  • Strap width: ⅝” – ¾”
  • Strap thicknesses from .015” to .023”
  • The A391 is available for high tensile strapping

Fromm A391 Semi-Automatic Sealless Tool

A semi-automatic combination tool with pneumatic tension and mechanical sealing, for fast, effortless banding.

  • Manufactured in Europe
  • Strap type: high tensile
  • Strap width: ½” – ¾”
  • Strap thicknesses from .015″ to .023″

Fromm A380, Pneumatic Steel Combination Tool, 1/2″ – 1″ x .020 – .040 HT

The A380 is used mainly in the timber and construction material industry. The massively constructed tool is characterized in particular by its reliability in shift work and with continuous operation under the most rigorous conditions. Supplied as a semi and fully automatic model, it is also produced in four tensioning levels. It is recommended to use the tool in suspended mode.

Fromm A385 Fully-Automatic Sealless Tool

A fully-automatic combination tool with pneumatic tension and sealing, for fast, effortless banding.

  • Manufactured in Europe
  • Microlock seal joint prevents joint decoupling
  • Pneumatic operation for considerable time savings
  • Air motor drive yields high and constant tension
  • Four stages of tension and tension speed available
  • Strap type: standard duty and high tensile
  • Strap width: ⅜” – ¾”

Fromm A480, Pusher type combination steel strapping tool,

The pneumatic A480 Fromm combination steel strapping tool is used with 1/2″, 5/8″ and 3/4″steel strapping. Due to its low weight in comparison to other pneumatic push style combination tools, the Fromm A480 does not have to be suspended. This permits mobile operation. Ideal for strapping tubes, wire coils and all kinds of small bundles, the A480 is a handy and popular tool in numerous industries. This tool uses push- seals which are ideal for round and narrow packages. The seal is pushed by the tool with the steel strap threaded through to pull the tension.

Fromm A482, Pneumatic Steel Combination Tool, 3/4″ x .025 – .035 HT

Due to its low weight the A482 does not necessarily have to be suspended. Straps of up to .035″ thickness can be processed. The perfect double notch up cut seal joint guarantees a strength of 75%. The modern A482 optimizes the strapping of packages, mainly in the metal industry.

Fromm A452, Pneumatic Pusher Type Tensioner, 3/4″ – 1-1/4″ x .025 – .050 HT

The Pneumatic pusher type tensioner A452 is characterized by its very high strap tension force of 8500 N. Thanks to its free-wheeling system, no strap tension is lost on completion of the tensioning cycle. This extremely rugged, fast and lightweight tool is suitable for both mobile and stationary applications.

Fromm A461, Pneumatic Single-hand Sealer, 3/4″ – 1-1/4″ x .025 – .040 HT

Pneumatic single-hand sealer A461 is used for joints and can be operated single-handed. It is fitted with a safety mechanism which prevents poor seal joints resulting from faulty operation.

MUL-420, Feedwheel Tensioner, 3/4”-1-1/4”

Heavy duty tensioner for high tensile steel strapping. European-made for exceptional performance in demanding applications. Needle bearings for maximum tension. Quick access to all wear parts for easy maintenance.

MUL-430, HD Heavy Duty Dual-Action Double-Notch Sealer, 1-1/4”

European design for speed, reliability and ease of use in heavy applications. Patented two-stage jaw action reduces sealing effort by 50%.

Teknika S-290

  • EconomyFeedwheel Tensioner
  • Unlimited take-up
  • For Flat Package Loads
  • For Strap Widths ⅜” – ¾”
  • For Strap Gauges .018 – .023

Teknika S-296

  • Standard Duty Feedwheel Tensioner
  • Unlimited take-up
  • For Flat Package Loads
  • For Strap Widths ⅜” – ¾”
  • For Strap Gauges .018 – .023

Teknika S-298

  • Heavy Duty Feedwheel Tensioner
  • Unlimited take-up
  • For Flat Package Loads
  • For Strap Widths ⅝” – 1-¼”
  • For Strap Gauges .023” – .031”HT

EP-1810, Economy Front Action Sealer, 1/2″, 5/8″, and 3/4″

Double-Notch, Down-Cut
For Strap Width 1/2″, 5/8″, and 3/4″
For Strap Gauges .018 to .023
Regular Duty Strapping

EP-1820, Single Notch Sealer, 1/2” x .020” to 3/4” x .023″

For use with a pusher tensioner and seals, on steel strapping from 1/2” x .020” to 3/4” x .023”. Specify strap width with order. Made in USA.

EP-1850, Front-Action Double-Notch Sealer, 3/4”

For use with 3/4” high tensile strapping and heavy duty seals.

EP-1800, Conventional Double Notch Sealer,1/2” x .020” to 3/4” x .023”

For use with standard open seals on steel strapping from 1/2” x .020” to 3/4” x .023”. Specify strap width with order. Made in USA.

EP-1870, Heavy Duty Side Action Sealer, 3/4″

Double notch down-cut with open or closed seals.

Strap width: 3/4″

Strap gauges: .025 to .035

EP-1880, HD Side-Action Single-Notch Sealer, 3/4” and 1-1/4”

For use with high tensile strapping and heavy duty seals. Specify strap width with order.

EP-2400, Economy Strap Shears, 3/8″ – 3/4″

Single Hand Operated
Strap Widths 3/8″ – 3/4″
For Strap Gauges up to .028

EP-2500, Heavy Duty Strap Shears, 3/4″ – 2″

Two Hand Operated
Strap Widths 3/4″ – 2″
For Strap Gauges up to .044

EP-1400

Compact tensioner for lighter weights of regular duty steel strapping.

• Compact -Light Duty Feedwheel Tensioner
• Made in USA
• Unlimited take-up
• For Flat Package Loads
• For Strap Widths ⅜” – ¾”
• For Strap Gauges .018 – .023

EP-1425

• Standard Duty Feedwheel Tensioner
• Made in USA
• Unlimited take-up
• For Flat Package Loads
For Strap Widths ⅜” – ¾”
For Strap Gauges .018 – .025 HT

EP-1450

• Heavy Duty Feedwheel Tensioner
• Unlimited take-up
• For Flat Package Loads
• For Strap Widths ¾” – 1-¼”
• For Strap Gauges .025” – .031” HT

EP-1600, Feedwheel Pusher Tool, 5/8” – 1-1/4”

Infinite take-up for bundling round and irregular products.

EP-1650, Rack and Pinion Pusher Tool, 5/8” – 1-1/4”

Conventional pusher tool for bundling round and irregular products.

EP-1500

  • Economy Windlass Tensioner
  • Limited take-up
  • For Flat Package Loads
  • For Strap Widths ¾” – 1-¼”
  • For Strap Gauges .023” – .031”HT

EP-1525, Premium Windlass Tensioner, 3/4 – 1-1/4”

Windlass tensioner for 3/4” and 1-1/4” (.025” – .031”) high tensile steel strapping.

  • Categories